Pertains To:
Item: VPLAT0013ABP Matches: LR4
We have specially-developed this truck wiring bundle for LR4 automobiles. This package seamlessly changes the Rover wiring plug to either a general ‘Flat 4’ North American specification plug or 7-way plug (both connections included!). Our quality utilize products are reliable and value a fraction of the original variations. They showcase a rubber plug limit to guard the surface trailer plug from details and simple plug-and-go installment suggests they may be setup in minutes.
Portion included in KitVPLAT0013ABP:
- 4 ea. M5 x 0.8mm x 40mm machine screws
- 1 ea. YMZ500770ABP use with truck fittings
- 1 ea. YMZ500502ABP utilize with vehicle connections
- 5 cable tv ties
- Guidelines
Tools You’ll Need For KitVPLAT0013ABP:
- Phillips Mind Screwdriver
- 10 mm wrench
Installations Process:
1. get rid of the remaining taillight assembly by removing the two screws. The end light will pull-off. (See photo1)
2. eliminate the Trailer Connector Access board. (See photo2)
3. The VPLAT0013ABP wires utilize is available in 2 components. One part with the connections that plug to the Trailer, and also the next spend the the connectors that connect inside automobile.
4. make part with the truck connectors and feed the use through orifice from inside the bumper (the hole regarding the remaining). Maneuver the trailer connector through the beginning. (It may take some twisting and turning, it will suit.)
5. protected the connector making use of 4 screws offered. (read photo 3.)
6. Remove the access screen within the left rear on meetmindful review the products area of the car and find the 2 grey connectors toward the top the available place additionally the round black grommet toward the base. (See image 4 and image 4a.)
7. The grey fittings take place in place by 2 “dummy” fittings. Draw each of the fittings from their mounting brackets and take off the “dummy” fittings. Remove the rubberized grommet nicely. (read pic 5.)
8. Look for a second plastic grommet behind the tail light installation and take away it. (read pic 6.)
9. give the wires utilize utilizing the car connections through 2 gaps in car, ensuring the grey connectors that put in to the auto include dealing with toward the interior. (discover picture 7.)
10. Once the wire is perhaps all ways through both of the gaps in automobile, push the grommets into destination.
11. Plug the two grey fittings on the trailer wires use in to the gray plugs with the vehicle funnel and snap into put on the brackets.
12. take away the nut through the grounding stud (10mm) and protected the band lug from the trailer wiring harness to the stud. Protected the use to your automobile with the fir-tree cable tie-on the utilize.
13. eliminate the free tire, you bring area to perform the cable tv underneath the vehicle.
14. manage the cable tv over the opening within the automobile directly behind the bumper and control the conclusion with the connector such that it arrives within the orifice in which you got rid of the end light construction. (discover picture 8.)
15. Once you is able to see the fittings in your neighborhood behind the tail light (read picture 9), link them to the utilize which you given from the vehicle. (read photo 10.)
16. ensure that the connections are completely seated (you should hear simple if the connections is fully involved). Drive the white synthetic locking tabs toward protected the connectors. (discover picture 11.)
17. Wrap these fittings utilizing the foam given so they won’t rattle about in your community below the tail light installation.
18. lock in the truck connector
19. Test the installation.
20. Reinstall the spare tire, tail light construction, truck access section as well as the access section into the remaining back with the freight area of the automobile.